This machine is a transmitter and a receiver that changes the cable type torque wrench to the wireless type.The tightening completion signal from the limit switch is wireless transmitted from the transmitter installed in the torque wrench. The receiver informs the worker of the tightening completion signal with the buzzer, and can manage the relay output with the possession computer and the sequencer.

FEATURES

1.The transmitter power supply is an easy coin battery type to exchange. Moreover, it is possible to use it approximate 150,000 times(shots) or more because of low current consumption.

2.We use a high efficiency weak radio wave of 426MHz Zone and strongly realize high communication of reliability for a noise.

3.The antenna-built-in type is superior in handling (controllability)

4.The communication check before start of work is also possible according to the battery check function.

5.The polycarbonate case mounted enables the dust & oil mist proof.

6.Two or more use is possible in the same area by 65526 kind of ID setting. (Assigned before shipment )

7.The Torque wrench with Limit Switch (LS) currently being used can be easily remodeled into the wireless type. *Depending on the type of torque wrench, transmitter may not be installed. Contact our sales office.

8. You can select the desired MOS-FET Relay output time of receiver from among four types of 200ms, 400ms, 600ms and 800ms.

9. This machine receives two kinds of codes, namely, ID1 and ID2.